Hand Held Cable & Wire Strippers

747 PORT-a-STRIP – PRODUCTION SET-UP
Kit contains: #724 hand held driver with #726 removable Ni-Cad battery pak (up to 250 strips per charge) One #727 power supply One #24 cutter head (any strip configuration) Carrying case with space for additional cutter heads.
747 PRODUCTION SET-UP
And now Introducing the NEW 747T
PRODUCTION SET-UP
This kit contains all off the items listed above for the 747 Kit

The new CT-6ST Coaxial Cable Tester [ click here for details ]
BOTH KITS CONTAIN
The


PORT-A-STRIP
FAST ~ PRECISE ~ PORTABLE
Cutter heads are interchangeable and
available for all cables and connectors!
Also See
747 PORT-a-STRIP – PRODUCTION SET-UP
Perfect for:
COAXIAL, TRIAXIAL, and
SEMI-RIGID CABLE
Sized and shaped like a flashlight, this
portable tool is designed to be rugged
enough for use in the field and extremely adaptable for in-house production use
FEATURES   
Produces bench-top quality strips FAST! Cuts and strips coax in 3 seconds Blades last up to 5,000 strips Quick-change patented cutter heads are available for all types of cable and strip dimensions Rugged ABS construction Weight (tool-kit with battery): 4.23 lbs. Dimensions: Driver, 2.75″ wide x 9.8″ long Maintenance: minimal (motor permanently sealed and lubricated), occasional cleaning of cutter head to remove debris, & blade replacement Driver is powered by Ni-Cad battery pack or optional #727 AC/DC power supply Non-standard cutter heads available
Tool comes complete with the following:
Hand-held driver AC-DC Power Supply One cutter head (any configuration) One heavy duty Ni-Cad battery pack Two chargers (AC & DC) Carrying case (with additional space for extra cutter heads)
Quick-change, patented cutter heads available for all types of
cable and strip dimensions
715 PORT-a-STRIP – COMPLETE PORTABLE SET-UP
Kit contains: #724 hand held driver with #726 removable Ni-Cad battery pak (up to 250 strips per charge) One #24 cutter head (any strip configuration) 2 chargers (A/C & D/C Auto) Carrying case with space for additional cutter heads.
715 COMPLETE PORTABLE SET-UP
And now Introducing the NEW 715T
COMPLETE PORTABLE SET-UP
This kit contains all of the items listed above for the 715 Kit
PLUS
The new CT-6ST Coaxial Cable Tester [ click here for details ]
BOTH KITS CONTAIN
The


PORT-A-STRIP
FAST ~ PRECISE ~ PORTABLE
Cutter heads are interchangeable and
available for all cables and connectors!
Also See
747 PORT-a-STRIP – PRODUCTION SET-UP
Perfect for:
COAXIAL, TRIAXIAL, and
SEMI-RIGID CABLE
Sized and shaped like a flashlight, this
portable tool is designed to be rugged
enough for use in the field and extremely adaptable for in-house production use
FEATURES   
Produces bench-top quality strips FAST! Cuts and strips coax in 3 seconds Blades last up to 15,000 strips Quick-change patented cutter heads are available for all types of cable and strip dimensions Rugged ABS construction Weight (tool-kit with battery): 4.23 lbs. Dimensions: Driver, 2.75″ wide x 9.8″ long Maintenance: minimal (motor permanently sealed and lubricated), occasional cleaning of cutter head to remove debris, & blade replacement Driver is powered by Ni-Cad battery pack or optional #727 AC/DC power supply Non-standard cutter heads available
Tool comes complete with the following:
Hand-held driver One cutter head (any configuration) One heavy duty Ni-Cad battery pack Two chargers (AC & DC) Carrying case (with additional space for extra cutter heads)
Quick-change, patented cutter heads available for all types
of cable and strip dimensions

747-CPP CABLE STRIPPER

Hand Held or Fixed Position Capability
FEATURES   
Can be used as a bench mount stripper with foot pedal operation by attaching the hand held unit to the snap-in mounts on the power supply. By removing the tool from the power supply snap-in mounts it can be used as a hand held stripper. Reduces stripping time, with less effort required than manual strippers Ergonomically designed. Made to be used for high volume applications, on-site locations, where AC power is available. Affordable, precise, and rugged, Coastel Quality Built.
700 SERIES ACCESSORIES
The following parts are available for replacement or upgrade.
726 REPLACEMENT BATTERY PAK   
Providing the extra power when needed, these quick change Ni-Cad battery paks provide up to 250 strips per charge without “memory effect”.
727 A/C TO D/C POWER SUPPLY   
For “high-run” and production applications this set-up converts the model #700 Hand-Held Driver to A/C power. NOTE: INCLUDES 741 ADAPTER PLUG CORD SET
741 ADAPTER PLUG CORD SET   
Adapts the 727 A/C to D/C power supply to any 700 series hand-held unit by replacing the battery pak. NOTE: IF YOU ORDER P/N 727 THIS ITEM IS INCLUDED. This item would normally be ordered as a replacement.
IMPORTANT INFORMATION ON THE 700 SERIES PORT-A-STRIP
WHAT THIS PRODUCT DOES: This NI-CAD battery powered Hand-Held tool delivers, in less than five seconds, Production Quality Strips in the form of a low-cost portable tool. The complete unit is made up of two basic components:
 1  A “Quick-Change” very precise Cutter Head that can be ordered for any required strip dimension. The Cutter Head blades last up to 5,000 (est.) strips and its low cost makes additional or replacement cutters very affordable. 2  A very powerful Portable Hand-Held Driver. This tool is assembled with only the highest quality components and comes with a 100% one-year “No Questions Asked” Warranty to prove it. This driver can be powered by a removable Ni-Cad battery pak or by our A/C Power Supply.
WHO OUR CUSTOMERS ARE   
Video – Voice – Signal – Data Industries
Production personnel, Field techs, value added manufacturers, and OEM’s are all ideal users of this product.
Any application where multiple Coaxial connector terminations are being made.
APPLICATIONS   
Jobs where time, quality and portability are essential. Wiring up a “Video Router”, Telco Exchange or Computer LAN are good examples. CATV and MATV contractors are ideal applications.
Applications that are difficult yet require extreme precision. In some cases these may be very low volume applications. Aerospace, Radar, and Microwave/RF are good examples.
Small and medium production applications where the cost of a production machine ($2,000 to $13,000) is either cost prohibative or unnecessary. This tool compromises nothing when comparing precision and strip quality. OEM’s and cable assembly manufacturers are good environments
MODEL 811RC BATTERY CHARGER – RECONDITIONER

 
 Coastel introduces “Smart Battery Charger Technology”
FEATURES   
Rapid Charging – Eliminates the need for extra Battery Packs Full Battery Charge on Demand Recalibration Mode – Reconditioning Extends Battery Life Intelligent Charging Protects against Overcharging Eliminates Crystalline Memory Reconditions Batteries which have already Developed Memory Keeps Battery Pack Factory Fresh and Ready to Use GENERAL INFORMATION:

The fast charge rate is 1000mA. It will take about 1 ½ hours to charge a fully deleted Battery Pack (time may vary)

During a Reconditioning cycle, the Battery Pack is discharged before it is charged. The discharge rate is approximately 400mA. It can take up to 6 hours to complete a Recondition Cycle.
SPECIFICATIONS   
Fast Charge, 107 min. (may vary)
Discharge/Recondition, 178 min (may vary)
DIMENSIONS   
Charging Station, 6.89″ x 4.89″ x 2.30″, wt. 14oz.
175mm . x 124mm x.58mm, wt. 397g

Power Supply 6.63″ x 3.50″ x 1.50″ wt. 14oz.
168mm x 89mm x 38mm, wt. 397g

Power Cord, 6.50″ x 3.00″ x 3.00″ , wt. 7oz.
165mm x 76mm x 76mm wt. 198g

Fast Charge Current: 1000mA

Battery Pack, 6-1.2V Ni-Cad sub C @1500mAh