SERVING THE VOICE, VIDEO, SIGNAL AND DATA
TRANSMISSION INDUSTRIES
WITH
STANDARD AND CUSTOM CABLE TOOLS AND
ACCESSORIES

 

MODEL 811RC BATTERY CHARGER - RECONDITIONER

Coastel introduces
“Smart Battery Charger Technology”

 
 

FEATURES   

  • Rapid Charging – Eliminates the need for extra Battery Packs
  • Full Battery Charge on Demand
  • Recalibration Mode – Reconditioning Extends Battery Life
  • Intelligent Charging Protects against Overcharging
  • Eliminates Crystalline Memory
  • Reconditions Batteries which have already Developed Memory
  • Keeps Battery Pack Factory Fresh and Ready to Use

GENERAL INFORMATION:

The fast charge rate is 1000mA. It will take about 1 ˝ hours to charge a fully deleted Battery Pack (time may vary)

During a Reconditioning cycle, the Battery Pack is discharged before it is charged. The discharge rate is approximately 400mA. It can take up to 6 hours to complete a Recondition Cycle.

SPECIFICATIONS   

Fast Charge, 107 min. (may vary)
Discharge/Recondition, 178 min (may vary)

DIMENSIONS   

Charging Station, 6.89" x 4.89" x 2.30", wt. 14oz.
175mm . x 124mm x.58mm, wt. 397g

Power Supply 6.63" x 3.50" x 1.50" wt. 14oz.
168mm x 89mm x 38mm, wt. 397g

Power Cord, 6.50" x 3.00" x 3.00" , wt. 7oz.
165mm x 76mm x 76mm wt. 198g

Fast Charge Current: 1000mA

Battery Pack, 6-1.2V Ni-Cad sub C @1500mAh

ADDITIONAL INFORMATION    

Click here for Important Information on the 700 Series Port-a-Strip

click here for Product PDF files

[TOP OF PAGE]

HOME

BENCH-TOP
EQUIPMENT

1066 PRODUCTION
BENCH-TOP STRIPPER

1066SR PRODUCTION
BENCH-TOP STRIPPER

1066SPD SEMI-RIGID STRIPPER-POINTER

CT3 SR SEMI-RIGID
STRIPPING SAW

64-SPP
POINTING TOOL

CT-200 ADJUSTABLE
WIRE STRIPPER

CT-200 OPERATING INSTRUCTIONS

 CUTTER
HEADS

#24 AND #24HD
CUTTER HEAD
S

CUTTER HEAD
ORDER PROCEDURE

CUTTER HEAD
SET-UP

CUTTER HEAD
ADJUSTMENT

BLADE CARTRIDGE
INSTALLATION

OPERATING
INSTRUCTIONS

 MISCELLANEOUS
TOOLS

CT100 SERIES
 THERMAL STRIPPER
S

CD178-255
CRIMP DIE

CCT601
CRIMPING FRAME

CCT602
 CENTER PIN CRIMPER

CT-6/CT-6ST COAXIAL
CABLE TESTERS

SPECIALIZED
SERVICES

SPECIALTY
EQUIPMENT

CT-4 COASTELMATIC
PNEUMATIC Tool Holder

CT-4 COASTELMATIC
OPERATING Instructions

CT915
CABLE CUTTER

 GENERAL
SHOP TOOLS

CT-3, CT-3A, CT-3HD
& CT3-AHD CUT-OFF SAW

CT-3 SERIES
ACCESSORY PRICES
CT-3 SERIES
TECH TIPS

CT-5 PRECISION
DRILL PRESS

 PRODUCT & SITE
INFORMATION

COASTEL CABLE TOOL'S
MISSION STATEMENT

COASTEL CABLE TOOL'S
QUALITY POLICY

ABOUT COASTEL
CABLE TOOLS

NEW PRODUCT
INFORMATION

PRODUCT
INFORMATION SHEETS

PRODUCT
BROCHURES

DISTRIBUTION
PARTNERS

 UPDATED  JULY 29, 2014

Copyright © 2001-2009 COASTEL CABLE TOOLS INTERNATIONAL CORP. All Rights Reserved.

MADE IN USA 

Coastel Cable Tools (Intl.) Corp.
344 East Brighton Avenue
Syracuse, NY 13210 USA

1-315-471-5361    FAX 1-315-472-1765

1-800-451-7615


Coastel Cable Tools looks forward to your feedback. There are several specific email forms in the menu above or just send a general email message by clicking here.

Thank you for your input!